أجهزة الاستشعار

اختبار التسارع

اقرأ قيم مقياس التسارع المباشرة، بما في ذلك الجاذبية، وتأكد من أن الحركة والإمالة تنتج تغييرات معقولة.

خصوصية: تبقى عينات التسريع في علامة تبويب المتصفح هذه. لا يتم تحميل أو حفظ بيانات الحركة.
تتم ترجمة تسميات الواجهة وأسماء الأدوات. الإرشادات التفصيلية والأسئلة الشائعة في هذه الصفحة مكتوبة حاليًا باللغة الإنجليزية.

واجهة الاختبار

قد يطلب متصفحك الإذن بعد الضغط على ابدأ.
مستعد. تمكين مقياس التسارع وتحريك الجهاز.
X—m/s²
Y—m/s²
Z—m/s²
ضخامة—m/s²
عينات0
مصدر الاستشعار—
في حالة السكون، يجب أن يكون الحجم الإجمالي قريبًا من 9.81 م/ث². تعمل بعض المتصفحات على إزالة الجاذبية أو تسهيل الإشارة، لذا استخدم التغييرات النسبية بدلاً من الدقة المطلقة.

كيفية استخدام هذه الأداة

  1. Click Enable accelerometer and allow motion access if prompted.
  2. Hold the device still and note the gravity reading on each axis.
  3. Tilt and shake the device gently and watch the values respond.
  4. Click Stop when finished to release sensor access.

إعلان

شرح تقني

The tool uses the Generic Sensor API Accelerometer when available and falls back to DeviceMotionEvent.accelerationIncludingGravity. Values are in metres per second squared (m/s²). At rest, the total magnitude should be close to Earth gravity, about 9.81 m/s².

The browser may remove gravity or apply sensor fusion differently. A phone at rest on a table can still show small fluctuations. This page does not calibrate the sensor and cannot detect a hardware fault with certainty.

استكشاف الأخطاء وإصلاحها

No values appear

Desktop browsers often have no accelerometer. Use a mobile device and HTTPS.

Values are all zero

Permission may be blocked or the browser may not expose motion events. Check site settings and try another browser.

Magnitude is not close to 9.81 at rest

Some devices report in different units or subtract gravity. Read the axis labels and compare relative changes.

Values are very noisy

Vibration, handling, and sensor quality affect the reading. Place the device on a stable surface.

الأسئلة المتداولة

إعلان