İvmeölçer Testi
Yer çekimi de dahil olmak üzere canlı ivmeölçer değerlerini okuyun ve hareket ile eğimin anlamlı değişiklikler yaratıp yaratmadığını kontrol edin.
Test arayüzü
Başlat tuşuna bastıktan sonra tarayıcınız izin isteyebilir.Bu araç nasıl kullanılır?
- Click Enable accelerometer and allow motion access if prompted.
- Hold the device still and note the gravity reading on each axis.
- Tilt and shake the device gently and watch the values respond.
- Click Stop when finished to release sensor access.
Reklam
Teknik açıklama
The tool uses the Generic Sensor API Accelerometer when available and falls back to DeviceMotionEvent.accelerationIncludingGravity. Values are in metres per second squared (m/s²). At rest, the total magnitude should be close to Earth gravity, about 9.81 m/s².
The browser may remove gravity or apply sensor fusion differently. A phone at rest on a table can still show small fluctuations. This page does not calibrate the sensor and cannot detect a hardware fault with certainty.
Sorun giderme
No values appear
Desktop browsers often have no accelerometer. Use a mobile device and HTTPS.
Values are all zero
Permission may be blocked or the browser may not expose motion events. Check site settings and try another browser.
Magnitude is not close to 9.81 at rest
Some devices report in different units or subtract gravity. Read the axis labels and compare relative changes.
Values are very noisy
Vibration, handling, and sensor quality affect the reading. Place the device on a stable surface.
İlgili araçlar
Sık sorulan sorular
Reklam