Performans

İnternet Hız Testi

Kontrol ettiğiniz yapılandırılabilir bir uç noktaya göre indirme, yükleme, gecikme ve titreşimi ölçün.

Mahremiyet: Test, test verilerini yapılandırılmış uç noktaya aktarır. Bir uç nokta yapılandırılmadıkça ve siz testi başlatmadıkça çalışmaz.
Arayüz etiketleri ve araç adları çevrilir. Bu sayfadaki ayrıntılı rehberlik ve SSS'ler şu anda İngilizce olarak yazılmıştır.

Test arayüzü

Başlat tuşuna bastıktan sonra tarayıcınız izin isteyebilir.
Yalnızca kontrol ettiğiniz veya güvendiğiniz uç noktalara karşı test yapın. Sonuçlar sunucuya, rotaya, Wi-Fi'ye ve diğer trafiğe göre değişir.
Başlamak için Başlat'a basın.
0.0 Mbps
Gecikme
İndirme hızı
Yükleme hızı
Titreşim
İndirme hızı—Mbps
Yükleme hızı—Mbps
Gecikme—ms
Titreşim—ms
Kullanılan veriler0 MB
Sunucu—
Bu, bir laboratuvar ölçümü değil, tarayıcı düzeyinde bir üretim tahminidir. Sunucu kapasitesine, CORS'a, TCP davranışına, Wi-Fi koşullarına ve eşzamanlı trafiğe bağlıdır.

Bu araç nasıl kullanılır?

  1. Click Start speed test and keep other downloads closed.
  2. The test measures latency first, then download and upload throughput.
  3. Read Mbps and millisecond values together with the server label.
  4. Use Repeat to check consistency, and Stop to cancel an active test.

Reklam

Teknik açıklama

The page performs timed HTTP requests against a configured endpoint, using cache-busting and measured transferred bytes. Latency is estimated from small request round trips. Throughput is calculated from bytes transferred over elapsed time.

Browser speed tests are affected by HTTP overhead, server location, TCP ramp-up, device CPU, Wi-Fi, and the endpoint capacity. A result is not a substitute for an ISP diagnostic or a calibrated line-rate measurement. This project ships without a default speed endpoint; you must configure one you control.

Sorun giderme

Test says no endpoint configured

Set speedtest.download_url, upload_url, and ping_url in app/config.local.php. The bundled test never uses a third-party server without configuration.

Results are much lower than expected

Close other transfers, use a wired connection where possible, and confirm the endpoint has enough bandwidth.

Upload fails

The endpoint must accept the upload method and size used by the test, and must allow cross-origin requests when hosted elsewhere.

Latency is unstable

Wi-Fi interference, bufferbloat, and background traffic affect jitter. Repeat at a quiet time.

Sık sorulan sorular

Reklam