Wydajność

Pobierz test szybkości

Zmierz przepustowość pobierania, przesyłając strumieniowo ładunek testowy z tej witryny i obserwuj na żywo szybkość i postęp.

Prywatność: Test pobiera wygenerowane dane z tej witryny. Strona nie przesyła żadnych danych osobowych i nic nie jest zapisywane na dysku.
Etykiety interfejsów i nazwy narzędzi są tłumaczone. Szczegółowe wskazówki i często zadawane pytania na tej stronie są obecnie napisane w języku angielskim.

Interfejs testowy

Twoja przeglądarka może poprosić o pozwolenie po naciśnięciu przycisku Start.
Gotowy. Wybierz rozmiar ładunku i rozpocznij test.
0.0 Mbps
Przeciętny—Mbps
Szczyt—Mbps
Wykorzystane dane0 MB
Upłynął—s
Przepustowość jest mierzona pomiędzy tą przeglądarką a tym serwerem. Na wynik wpływają pojemność serwera, Wi-Fi i inny ruch; nie jest to test certyfikujący linię szerokopasmową.

Jak korzystać z tego narzędzia

  1. Choose a payload size that matches your connection and data allowance.
  2. Click Start download test and leave the tab in the foreground.
  3. Watch the live Mbps value and progress bar as data arrives.
  4. Read the final average and repeat the test to check consistency.

Reklama

Wyjaśnienie techniczne

The browser fetches a generated binary stream from the same-origin test endpoint and counts bytes as they arrive. Throughput is calculated from the transferred bits divided by the measured transfer time, excluding the initial connection setup where possible.

This measures the path between your browser and this server, not your full broadband capacity. Server bandwidth, CDN caching, Wi-Fi, TCP ramp-up, and other traffic all affect the result. It is an estimate, not a line-certification test.

Rozwiązywanie problemów

The test fails immediately

Reload the page and check your connection. Some networks block large downloads or require a proxy.

Speed is much lower than my plan

The server or route may be the bottleneck. Close other transfers and try a wired connection.

Speed starts low then rises

TCP slow start and connection setup commonly reduce the first second. The final average is more representative.

The test uses too much data

Choose a smaller payload. On metered connections, avoid repeated large runs.

Często zadawane pytania

Reklama