Leistung

Laden Sie den Geschwindigkeitstest herunter

Messen Sie den Download-Durchsatz, indem Sie eine Testnutzlast von dieser Website streamen und die Live-Rate und den Fortschritt beobachten.

Privatsphäre: Der Test lädt generierte Daten von dieser Site herunter. Es werden keine persönlichen Daten gesendet und die Seite speichert nichts auf der Festplatte.
Schnittstellenbezeichnungen und Werkzeugnamen werden übersetzt. Detaillierte Anleitungen und FAQs auf dieser Seite sind derzeit auf Englisch verfasst.

Testschnittstelle

Möglicherweise fragt Ihr Browser nach Ihrer Erlaubnis, nachdem Sie auf „Start“ geklickt haben.
Bereit. Wählen Sie eine Nutzlastgröße und starten Sie den Test.
0.0 Mbps
Durchschnitt—Mbps
Gipfel—Mbps
Verwendete Daten0 MB
Vergangen—s
Der Durchsatz wird zwischen diesem Browser und diesem Server gemessen. Serverkapazität, WLAN und anderer Datenverkehr beeinflussen das Ergebnis; Es handelt sich nicht um einen Breitbandleitungszertifizierungstest.

So verwenden Sie dieses Tool

  1. Choose a payload size that matches your connection and data allowance.
  2. Click Start download test and leave the tab in the foreground.
  3. Watch the live Mbps value and progress bar as data arrives.
  4. Read the final average and repeat the test to check consistency.

Werbung

Technische Erklärung

The browser fetches a generated binary stream from the same-origin test endpoint and counts bytes as they arrive. Throughput is calculated from the transferred bits divided by the measured transfer time, excluding the initial connection setup where possible.

This measures the path between your browser and this server, not your full broadband capacity. Server bandwidth, CDN caching, Wi-Fi, TCP ramp-up, and other traffic all affect the result. It is an estimate, not a line-certification test.

Fehlerbehebung

The test fails immediately

Reload the page and check your connection. Some networks block large downloads or require a proxy.

Speed is much lower than my plan

The server or route may be the bottleneck. Close other transfers and try a wired connection.

Speed starts low then rises

TCP slow start and connection setup commonly reduce the first second. The final average is more representative.

The test uses too much data

Choose a smaller payload. On metered connections, avoid repeated large runs.

Häufig gestellte Fragen

Werbung