Lautsprechertest
Testen Sie den linken und rechten Lautsprecher, überprüfen Sie die Stereotrennung und spielen Sie Sweep- oder Festfrequenztöne in sicherer Lautstärke ab.
Testschnittstelle
Möglicherweise fragt Ihr Browser nach Ihrer Erlaubnis, nachdem Sie auf „Start“ geklickt haben.So verwenden Sie dieses Tool
- Lower the volume before starting, especially with powered speakers or amplifiers.
- Use Left and Right to identify which speaker plays each channel.
- Try the stereo sweep and confirm sound moves predictably between speakers.
- Use the frequency sweep to check for rattles, then stop playback.
Werbung
Technische Erklärung
The Web Audio API routes oscillators and a swept sine signal to the left and right output channels. A stereo test cannot compensate for room acoustics, speaker placement, or an operating-system virtual surround effect.
Speaker faults often appear as rattles, dropouts, or imbalance at particular frequencies. The sweep can reveal suspicious sounds, but interpreting them requires care and a reasonable listening level.
Fehlerbehebung
Only one speaker plays
Check the cable, amplifier channel, and system balance. Swap the left and right cables to isolate the fault.
Rattle at high volume
Reduce the volume immediately. A loose cabinet, damaged driver, or objects vibrating nearby can cause rattling.
No bass
Check the subwoofer connection and crossover settings. Small speakers may not reproduce low frequencies at all.
Volume is still too loud
Use the in-page volume slider and lower your system volume before restarting playback.
Verwandte Tools
Häufig gestellte Fragen
Werbung