스피커 테스트
왼쪽 및 오른쪽 스피커를 테스트하고, 스테레오 분리를 확인하고, 안전한 볼륨에서 스윕 또는 고정 주파수 톤을 재생합니다.
테스트 인터페이스
시작을 누른 후 브라우저에서 권한을 요청할 수 있습니다.이 도구를 사용하는 방법
- Lower the volume before starting, especially with powered speakers or amplifiers.
- Use Left and Right to identify which speaker plays each channel.
- Try the stereo sweep and confirm sound moves predictably between speakers.
- Use the frequency sweep to check for rattles, then stop playback.
광고
기술적인 설명
The Web Audio API routes oscillators and a swept sine signal to the left and right output channels. A stereo test cannot compensate for room acoustics, speaker placement, or an operating-system virtual surround effect.
Speaker faults often appear as rattles, dropouts, or imbalance at particular frequencies. The sweep can reveal suspicious sounds, but interpreting them requires care and a reasonable listening level.
문제 해결
Only one speaker plays
Check the cable, amplifier channel, and system balance. Swap the left and right cables to isolate the fault.
Rattle at high volume
Reduce the volume immediately. A loose cabinet, damaged driver, or objects vibrating nearby can cause rattling.
No bass
Check the subwoofer connection and crossover settings. Small speakers may not reproduce low frequencies at all.
Volume is still too loud
Use the in-page volume slider and lower your system volume before restarting playback.
관련 도구
자주 묻는 질문
광고