성능

속도 테스트 다운로드

이 웹사이트에서 테스트 페이로드를 스트리밍하여 다운로드 처리량을 측정하고 실시간 속도와 진행 상황을 확인하세요.

은둔: 테스트는 이 사이트에서 생성된 데이터를 다운로드합니다. 개인 정보는 전송되지 않으며 페이지에서 디스크에 아무것도 저장하지 않습니다.
인터페이스 라벨과 도구 이름이 번역됩니다. 이 페이지의 자세한 지침과 FAQ는 현재 영어로 작성되어 있습니다.

테스트 인터페이스

시작을 누른 후 브라우저에서 권한을 요청할 수 있습니다.
준비가 된. 페이로드 크기를 선택하고 테스트를 시작하세요.
0.0 Mbps
평균—Mbps
정점—Mbps
사용된 데이터0 MB
경과됨—s
처리량은 이 브라우저와 이 서버 사이에서 측정됩니다. 서버 용량, Wi-Fi 및 기타 트래픽이 결과에 영향을 미칩니다. 이는 광대역 회선 인증 테스트가 아닙니다.

이 도구를 사용하는 방법

  1. Choose a payload size that matches your connection and data allowance.
  2. Click Start download test and leave the tab in the foreground.
  3. Watch the live Mbps value and progress bar as data arrives.
  4. Read the final average and repeat the test to check consistency.

광고

기술적인 설명

The browser fetches a generated binary stream from the same-origin test endpoint and counts bytes as they arrive. Throughput is calculated from the transferred bits divided by the measured transfer time, excluding the initial connection setup where possible.

This measures the path between your browser and this server, not your full broadband capacity. Server bandwidth, CDN caching, Wi-Fi, TCP ramp-up, and other traffic all affect the result. It is an estimate, not a line-certification test.

문제 해결

The test fails immediately

Reload the page and check your connection. Some networks block large downloads or require a proxy.

Speed is much lower than my plan

The server or route may be the bottleneck. Close other transfers and try a wired connection.

Speed starts low then rises

TCP slow start and connection setup commonly reduce the first second. The final average is more representative.

The test uses too much data

Choose a smaller payload. On metered connections, avoid repeated large runs.

자주 묻는 질문

광고