디스플레이 및 입력

키보드 테스트

키보드의 모든 키를 테스트하고, 실시간 키 코드와 수정자를 확인하고, 예기치 않게 고정되거나 반복되는 키를 감지하세요.

은둔: 키 식별자만 표시됩니다. 입력한 텍스트는 캡처, 저장 또는 업로드되지 않으며 비밀번호 필드는 대상으로 지정되지 않습니다.
인터페이스 라벨과 도구 이름이 번역됩니다. 이 페이지의 자세한 지침과 FAQ는 현재 영어로 작성되어 있습니다.

테스트 인터페이스

시작을 누른 후 브라우저에서 권한을 요청할 수 있습니다.
키보드 이벤트를 수신할 수 있도록 테스트 영역을 먼저 클릭하세요.
0%
테스트된 키0
총 키0
반복되는 이벤트0
수정자—
마지막 키: — — —
테스트는 물리적 키 코드를 사용하므로 키보드 레이아웃 전반에 걸쳐 작동합니다. 일부 미디어, 기능 및 공급업체 키는 웹 페이지에 노출되지 않습니다. 강조 표시되지 않는 키는 브라우저나 운영 체제에 의해 차단될 수 있습니다.

이 도구를 사용하는 방법

  1. Click inside the test area so it receives keyboard focus.
  2. Press keys one at a time and watch them light up on the layout.
  3. Check the key code, location, and modifier status for each press.
  4. Use Reset to clear tested keys or change the layout if needed.

광고

기술적인 설명

The page listens for keydown and keyup events and reads event.code, event.key, event.location, and modifier flags. event.code describes the physical key position; event.key reflects the character produced, which varies with layout and modifiers.

The test never reads input from other applications and cannot see keys pressed while the page is not focused. It also cannot inspect a keyboard at the firmware level.

문제 해결

A key does not highlight

Click the test area first, then try the key again. Browser shortcuts may be intercepted before the page receives them.

Wrong character appears

The operating-system keyboard layout may differ from the layout shown. Switch layouts or use the key-code display.

Keys repeat

Check the operating-system repeat settings. A stuck key usually repeats even after release; a hardware fault may require service.

Media keys do nothing

Many media and function keys are handled by the operating system and never reach the browser.

자주 묻는 질문

광고