Prestatie

Snelheidstest downloaden

Meet de downloaddoorvoer door een testlading vanaf deze website te streamen en bekijk de live snelheid en voortgang.

Privacy: Bij de test worden de gegenereerde gegevens van deze site gedownload. Er worden geen persoonlijke gegevens verzonden en er wordt niets door de pagina op schijf opgeslagen.
Interfacelabels en gereedschapsnamen worden vertaald. Gedetailleerde richtlijnen en veelgestelde vragen op deze pagina zijn momenteel in het Engels geschreven.

Testinterface

Uw browser kan om toestemming vragen nadat u op Start heeft gedrukt.
Klaar. Kies een payloadgrootte en start de test.
0.0 Mbps
Gemiddeld—Mbps
Piek—Mbps
Gebruikte gegevens0 MB
Verstreken—s
De doorvoer wordt gemeten tussen deze browser en deze server. Servercapaciteit, Wi-Fi en ander verkeer hebben invloed op het resultaat; het is geen certificeringstest voor breedbandlijnen.

Hoe u dit hulpmiddel kunt gebruiken

  1. Choose a payload size that matches your connection and data allowance.
  2. Click Start download test and leave the tab in the foreground.
  3. Watch the live Mbps value and progress bar as data arrives.
  4. Read the final average and repeat the test to check consistency.

Advertentie

Technische uitleg

The browser fetches a generated binary stream from the same-origin test endpoint and counts bytes as they arrive. Throughput is calculated from the transferred bits divided by the measured transfer time, excluding the initial connection setup where possible.

This measures the path between your browser and this server, not your full broadband capacity. Server bandwidth, CDN caching, Wi-Fi, TCP ramp-up, and other traffic all affect the result. It is an estimate, not a line-certification test.

Problemen oplossen

The test fails immediately

Reload the page and check your connection. Some networks block large downloads or require a proxy.

Speed is much lower than my plan

The server or route may be the bottleneck. Close other transfers and try a wired connection.

Speed starts low then rises

TCP slow start and connection setup commonly reduce the first second. The final average is more representative.

The test uses too much data

Choose a smaller payload. On metered connections, avoid repeated large runs.

Veelgestelde vragen

Advertentie